NETGEAR Nighthawk AX6 User Manual

To set up a pass-through IPv6 Internet connection:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. From the Internet Connection Type menu, select Pass Through.
The page adjusts, but no additional fields display.
6. Click the Apply button.
Your settings are saved.
Set up an IPv6 fixed Internet connection
To set up a fixed IPv6 Internet connection:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5. From the Internet Connection Type menu, select Fixed.
The page adjusts.
User Manual31Specify Your Internet Settings
Nighthawk AX6 6-Stream AX5400 WiFi Router

NETGEAR Nighthawk AX6 Specifications

General

WiFi Range	Up to 2, 500 sq. ft.
Number of Devices	Up to 25
Beamforming	Yes
MU-MIMO	Yes
Model	RAX50
OFDMA	Yes
WiFi Technology	802.11ax
Processor	1.5GHz
Ethernet Ports	5 (1 WAN, 4 LAN)
USB Ports	1 x USB 3.0
Security	WPA3
Wi-Fi Bands	Dual-Band (2.4GHz + 5GHz)
Antenna	4 external antennas