EasyManuals Logo

NETGEAR Nighthawk AX6 User Manual

NETGEAR Nighthawk AX6
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
The router automatically detects the information in the following fields:
Connection Type. This field indicates the connection type that is detected.
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router’s WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address. If no address is acquired, the field displays Not Available.
Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’s LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
6. Select an IP Address Assignment radio button:
Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCv6 client function.
Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your
home network (the LAN).
7.
(Optional) Select the Use This Interface ID check box and specify the interface ID
to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC
address.
8. Click the Apply button.
Your settings are saved.
Set up an IPv6 6to4 tunnel Internet connection
The remote relay router is the router to which your router creates a 6to4 tunnel. Make
sure that the IPv4 Internet connection is working before you apply the 6to4 tunnel
settings for the IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
User Manual29Specify Your Internet Settings
Nighthawk AX6 6-Stream AX5400 WiFi Router

Table of Contents

Other manuals for NETGEAR Nighthawk AX6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AX6 and is the answer not in the manual?

NETGEAR Nighthawk AX6 Specifications

General IconGeneral
WiFi RangeUp to 2, 500 sq. ft.
Number of DevicesUp to 25
BeamformingYes
MU-MIMOYes
ModelRAX50
OFDMAYes
WiFi Technology802.11ax
Processor1.5GHz
Ethernet Ports5 (1 WAN, 4 LAN)
USB Ports1 x USB 3.0
SecurityWPA3
Wi-Fi BandsDual-Band (2.4GHz + 5GHz)
Antenna4 external antennas

Related product manuals