NETGEAR NIGHTHAWK CM2000 User Manual

Specify the cable connection starting
frequency
The starting frequency is automatically generated. For most Internet connections, you
do not need to specify this information. If you must enter a starting frequency, contact
your Internet provider.
To change the starting frequency:
1.
Launch a web browser from a computer that is connected to your cable modem.
2.
Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The default password is printed on the product label. The
user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Cable Connection.
The Cable Connection page displays the status of all downstream and upstream
channels.
5.
In the Starting Frequency field, type a number as instructed by your cable Internet
provider.
6. Click the Apply button.
Your settings are saved.
Reboot the cable modem
Rebooting the cable modem disconnects all network connections to the cable modem’s
local area network (LAN). After the cable modem is finished booting and reestablishes
a connection with the Internet, the devices on your network reconnect to the cable
modem’s LAN.
To reboot the cable modem:
1.
Launch a web browser from a computer that is connected to your cable modem.
2.
Enter http://192.168.100.1.
A login window opens.
User Manual17Manage Your Network
Nighthawk CM2000 2.5 Gbps Ultra-High Speed Cable Modem

NETGEAR NIGHTHAWK CM2000 Specifications

General

Cables included	AC, LAN (RJ-45)
Quick start guide	Yes
WAN connection	Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports	1
Product color	Black
DC input voltage	12 V

Weight and Dimensions

Depth	172 mm
Width	94 mm
Height	208 mm
Weight	482 g