Need help?Do you have a question about the NETGEAR Orbi LBR1020 and is the answer not in the manual?
General| Brand | NETGEAR |
|---|---|
| Model | Orbi LBR1020 |
| Category | Network Router |
| Language | English |
Explains the status indicated by the Orbi router's LEDs.
Steps to connect the router to your LTE provider's mobile network.
Instructions for downloading and using the NETGEAR Orbi mobile app.
Guide on connecting the router to a wired modem for internet access.
How to connect devices via WiFi or Ethernet.
Details on information found on the router's label.
Explains different types of login credentials for the router.
Steps to access the router's web interface for setup.
How to change the interface language of the router.
Details on using the mobile broadband connection as primary or backup.
Lists Orbi features not functional with mobile broadband.
Using the wizard to automatically configure mobile broadband.
Configuring the router to switch to mobile broadband if wired fails.
Switching between wired-only or mobile-only connection modes.
How to set the Access Point Name (APN) for the LTE provider.
Selecting the network mode (4G/3G) for mobile broadband.
Setting up PDP, authentication method, and credentials for mobile broadband.
Entering SIM card PIN or PUK for connection.
Adjusting the roaming setting for the SIM card.
Wizard for setting up wired internet.
Manual configuration steps for wired internet.
Setting up internet without login credentials.
Setting up internet with login credentials like PPPoE.
Configuring various IPv6 internet connection types.
Automatically detecting IPv6 connection settings.
Automatically configuring IPv6 connection settings.
Setting up an IPv6 6to4 tunnel connection.
Setting up an IPv6 6rd tunnel connection.
Setting up an IPv6 pass-through connection.
Setting up a fixed IPv6 internet connection.
Setting up an IPv6 DHCP internet connection.
Setting up an IPv6 PPPoE internet connection.
Adjusting the Maximum Transmission Unit (MTU) size for optimal performance.
How to check internet bandwidth using Ookla Speedtest.
Prioritize WiFi traffic like voice and video.
Enabling UPnP for device discovery and connectivity.
Adjusting implicit beamforming for WiFi signal improvement.
Configuring MU-MIMO for improved WiFi performance.
Enabling fast roaming for seamless WiFi band switching.
Securely change the router's administrative login password.
Configure rules for incoming traffic forwarding.
Configure rules for outgoing traffic filtering.
Secure the SIM card with PIN or PUK.
Configure the WAN/LAN1 port's role as WAN or LAN.
Adjust Wide Area Network (WAN) settings.
Modify Local Area Network TCP/IP settings like IP address.
Set up and manage Dynamic DNS service for remote access.
Configure a default DMZ server for security and application compatibility.
Rename the router for network identification.
Configure the router to assign IP addresses to network devices.
Turn off the router's DHCP server functionality.
Reserve specific IP addresses for LAN devices.
Add and configure static routes for network traffic.
Configure fundamental WiFi network settings like SSID and channel.
Update WiFi password and security settings (WPA2).
Create a separate guest WiFi network for visitors.
Adjust advanced WiFi configurations.
Configure the router to function solely as an Access Point (AP).
Switch between router and AP modes.
Configure bridging for port groups or VLAN tags, e.g., for IPTV.
Check and install new firmware for the router.
Manually upload firmware to the router from a file.
Check for and update LTE module firmware.
Manually upload LTE module firmware from a file.
Change the router's administrative login password.
Enable the feature to reset the admin password if forgotten.
Steps to reset a forgotten admin password using security questions.
Check the router's current status and usage data.
Monitor the status of the mobile broadband connection.
Monitor the status of the wired internet connection.
View statistics for router's WAN and LAN ports.
Review logs of router activities like access and blocked actions.
See a list of devices connected to the network.
Modify device details in the attached devices list.
Track internet data usage and set limits.
Configure time settings and NTP server.
Back up, restore, or erase router settings.
Configure remote management of the router over the internet.
Establish a virtual private network (VPN) connection to your network.
Configure VPN service settings on the router.
Install OpenVPN client software on devices (Windows, Mac, iOS, Android).
Establish a VPN tunnel from a Windows computer to the router.
Configure VPN to access home internet service remotely.
Set up port forwarding to make local servers accessible from the internet.
Configure port triggering for dynamic port opening based on outbound traffic.
Understand the status indicated by the Orbi satellite's LEDs.
Guidance on optimal satellite placement for best signal.
Steps to sync a new satellite with the router.
Add a satellite to your Orbi network using the router's web interface.
Manually update the satellite's firmware from a file.
Create a new password for router-satellite WiFi communication.
Check the operational status of satellites.
View connected satellites and edit their information.
Configure daisy-chain connection between satellites.
Control LED lighting and Sync button on outdoor satellites.
Basic tips for resolving mobile broadband connection issues.
Monitor and improve mobile broadband signal strength.
Step-by-step guide to restart wired network devices.
Resolve issues connecting to the WiFi network.
Use ping utility for network diagnostics.
Default configuration settings for the router.
Default configuration settings for the satellite.
Detailed technical specifications of the Orbi router.
Detailed technical specifications of the Orbi satellite.
To Next Page