Orbi router LED behavior
The Orbi router has a Power LED on the back and a Ring LED on the top. For information
about the precise locations of the LEDs, see the installation guide, which you can
download by visiting netgear.com/support/download.
The following table describes the LED behavior.
Table 1. Power LED behavior for Orbi router
DescriptionLED color
Router is booting or Sync (WPS) button has been pushed.Pulsing white
Internet connection is established.Solid blue
Unable to connect to internet.Solid amber
The router’s firmware is corrupted.Pulsing red
85% to 99% of data used.White and orange
pulse
100%+ of data used.White red pulse
Power is not suppliedOff
User Manual10Overview
Orbi 4GX Router Model LBR1020
To Next Page
Loading...
