NETGEAR Orbi LBR1020 - Factory Settings for Orbi Satellite RBS10

Table 4. Factory default settings for the router (Continued)
Default SettingFeature
GMT for WW except NA and GR
GMT+1 for GR
GMT-8 for NA
Time zone
DisabledTime zone adjusted for daylight
saving time
DisabledSNMP
Firewall
Disabled (except traffic on port 80, the HTTP port)Inbound (communications coming
in from the Internet)
Enabled (all)Outbound (communications going
out to the Internet)
DisabledSource MAC filtering
WiFi
EnabledWiFi communication
See router labelSSID name
WPA2-PSK (AES)Security
EnabledBroadcast SSID
Auto
Note: Maximum wireless signal rate derived from IEEE Standard 802.11
specifications. Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data
throughput rate.
Transmission speed
Australia.Country/region
AutoRF channel 2.4 GHz fronthaul
Channel 48 for NA, PR, AU, CA, and TW
Channel 36 for EU, KO, JP, and IN
RF channel 5 GHz fronthaul
Factory Settings for Orbi Satellite Model
RBS10
The following table shows the factory default settings for the satellite.
User Manual166Supplemental Information
Orbi 4GX Router Model LBR1020