5. Click the Browse button.
6.
Locate and select the router firmware file you downloaded.
The firmware file name ends in .img or .chk.
7. Click the Upload button.
It takes a few minutes to complete the process.
CAUTION: To avoid the risk of corrupting the firmware, do not interrupt the update.
For example, do not close the browser, click a link, or load a new page. Do not turn
off the router.
8.
After the router finishes updating, check the firmware version in the Router
Information pane on the ADVANCED home page.
The firmware on your Orbi router is updated.
admin password
The admin password is the password that you need to log in to the router web interface
and satellite web interface. You can change this password, and you can enable the
password reset feature so that you can reset the password if it is forgotten.
Change the admin password
This feature let you change the default password that is used to log in to the router with
the user name admin. This password is not the one that you use to access the Orbi WiFi
network.
Note: Be sure to change the password for the user name admin to a secure password.
The ideal password contains no dictionary words from any language and contains
uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
To set the password for the user name admin:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi Pro network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 30.
User Manual159Manage and Monitor Your Orbi
Pro System
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
To Next Page
Loading...
Need help?
General
