Manage the allowed devices on the network access control
list
If you set up an access list that blocks all new devices from accessing the Orbi Pro
network, you must specify which devices are allowed to access the Orbi Pro network.
You can add a device, remove a device, or edit the information for a device.
To manage devices that are allowed to access to Orbi Pro network:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi Pro network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 30.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5.
Click the View list of allowed devices not currently connected to the network
link.
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected but allowed to access the Orbi Pro network.
6.
To add a device to the allowed list, do the following:
a. Click the Add button.
The Add Allowed Device page displays.
b.
Enter the MAC address and device name for the device that you want to allow.
c. On the Add Allowed Device page, click the Apply button.
The device is added to the allowed list on the Access Control page.
7.
To remove a device from the allowed list, do the following:
a.
Select the check box for the device.
b.
Click the Remove from the list button.
User Manual62Control Access to the Internet
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
To Next Page
Loading...
Need help?
General
