NETGEAR Orbi User Manual

Specify Network Settings
66
Orbi High-Performance AC3000 Tri-band WiFi System
A login window opens.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADV
ANCED > Setup > LAN Setup.
5. In the Address Reservation section of the page, click the Add button.
6. In the IP Address field, type the IP address to assign to the computer or server.
Choose an IP address from the router’s LAN subnet, such as 192.168.1.x.
7. T
ype the MAC address of the computer or server.
Tip: If the computer is already on your network, you can copy its MAC
address from the
Attached Devices page and paste it here.
8. Click the Apply button.
The reserved address is entered into the table.
The reserved address is not assigned until the next time the computer contacts the router’s
DHCP server
. Reboot the computer, or access its IP configuration and force a DHCP release
and renew.

NETGEAR Orbi Specifications

General

Parental Controls	Yes
Guest Network	Yes
Beamforming	Yes
Coverage	Up to 5, 000 sq. ft.
Ethernet Ports	4 Gigabit Ethernet ports
Memory	512MB NAND flash
Security	WPA2
Compatibility	Works with