NETGEAR Powerline PLP2000 User Manual

5
Power LED Solid green. The electrical power is on.
Slow blinking green (blink every three seconds). The
adapter is in power saving mode.
Blinking green (blink every second). The adapter is in the
process of setting up security.
O. The adapter is not receiving electrical power.
Ethernet LED Solid green. The Ethernet port is linked.
O. No Ethernet connection is detected.
Pick A Plug LED The Pick A Plug feature lets you pick the electrical outlet with
the strongest performance, indicated by the color displayed
by the LED:
Red. Link rate < 50 Mbps (good).
Amber. Link rate > 50 and < 80 Mbps (better).
Green. Link rate > 80 Mbps (best).
O. The adapter did not find any other compatible Powerline
devices using the same encryption key.

NETGEAR Powerline PLP2000 Specifications

General

Model	PLP2000
Type	Powerline Adapter
Powerline Speed	2000 Mbps
Passthrough Power Outlet	Yes
HomePlug AV2	Yes
Encryption	128-bit AES
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Standards and Protocols	HomePlug AV2, IEEE 1901
Ethernet Ports	2 Gigabit Ethernet ports
Plug Type	US