NETGEAR Powerline PLP2000 User Manual

6
Security/Factory
Reset button
Press and hold the Security/Factory Reset button for 1 to
3 seconds and then release it to create a secure Powerline
network.
Press and hold the Security/Factory Reset button for 8
to 10 seconds, and then release it to return the Powerline
adapter to its factory default settings.
Ethernet ports Two GbE ports. Use Ethernet cables to connect your wired
devices, including computers, WiFi routers, or game consoles,
to your Powerline network.
For information about the standards your adapter meets, see the user
manual.

NETGEAR Powerline PLP2000 Specifications

General

Model	PLP2000
Type	Powerline Adapter
Powerline Speed	2000 Mbps
Passthrough Power Outlet	Yes
HomePlug AV2	Yes
Encryption	128-bit AES
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Standards and Protocols	HomePlug AV2, IEEE 1901
Ethernet Ports	2 Gigabit Ethernet ports
Plug Type	US