Advanced Settings
116
Trek N300 Travel Router and Range Extender PR2000
3. Enter the Trek user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > Wireless Settings.
6. Scroll down to display the WPS settings:
The Router’s PIN field displays the PIN that you use on a registrar (for example, from
Network Explorer on a Vista Windows computer) to configure the Trek’s wireless settings
through WPS.
7. (Optional) Select or clear the Disable Router
’s PIN check box.
The PIN function might temporarily be disabled when the Trek detects suspicious
attempts to break into the T
rek’s wireless settings by using the Trek’s PIN through WPS.
You can manually enable the PIN function by clearing the Disable Router’s PIN check
box.
8. (Optional) Select or clear the Keep Existing W
ireless Settings check box.
By default, the Keep Existing W
ireless Settings check box is selected. NETGEAR
recommends that you leave this check box selected.
If you clear this check box, the next time a new wireless client uses WPS to connect to
the Trek, the Trek wireless settings change to an automatically generated random SSID
and security key.
9. Click the Apply button.
To Next Page
Loading...
Need help?
General
