Advanced Settings
115
Trek N300 Travel Router and Range Extender PR2000
5. Select ADVANCED > Advanced Setup > Wireless Settings.
6. Select the Turn off wireless signal by schedule check box.
The T
urn off wireless signal by schedule check box can be selected only when the
Trek is operating in wired WAN mode.
7. Click the Add a new period button.
8. Use the lists, radio buttons, and check boxes to set up a period during which you want to
turn off the wireless signal.
9. Click the Apply button.
The Advanced Wireless Settings screen displays.
10. Click the Apply button.
Your changes are saved.
View or Change WPS Settings
To specify WPS settings:
1. Launch your browser from a computer or wireless device that is connected to the T
rek.
2. Enter www
.routerlogin.net or www.routerlogin.com in the web browser address bar.
The login screen displays.
To Next Page
Loading...
Need help?
General
