Hardware Setup
16
Trek N300 Travel Router and Range Extender PR2000
CAUTION: Most public WiFI hotspots offer no security. NETGEAR recommends that you
do not send personal information over the Internet from your personal devices.
NETGEAR
LAN
Internet/LAN
Reset
USB
WiFi
USB
Power
Internet
(Optional) Connect a USB device to the USB port
Figure 9. WiFi hotspot connection
To connect to a public WiFi hotspot:
1. Connect the T
rek to a power source.
For more information, see Power Inputs on page 13.
2. T
urn on power to the Trek by moving the Internet via switch from the Power Off position to
the Wireless position.
3. Rotate the Trek’
s cover clockwise to orient the antenna.
For more information, see Antenna Orientation on page 14.
4. Connect your computer or wireless device to the T
rek's SSID, or connect your computer or
wireless device to the Trek’s LAN port with an Ethernet cable.
5. Open a web browser on your computer
, type www.routerlogin.net in the address field, and
press the Enter key.
If a login screen displays, enter admin for your user name and password for your
password.
The user name and password are case-sensitive. Then click the OK button.
To Next Page
Loading...
Need help?
General
