USB Port
75
Trek N300 Travel Router and Range Extender PR2000
5. Select BASIC > ReadySHARE.
6. Click the Edit button.
7. To specify access to the USB storage device, provide the following information:
• Network Device Name.
The default is readyshare. This name is the name used to
access the USB device connected to the Trek.
• W
orkgroup. If you are using a Windows workgroup rather than a domain, the
workgroup name displays here. The name works only in an operating system that
supports NetBIOS, such as Microsoft Windows.
• Access Method. Select the check boxes for the access methods that you want:
- Network Neighborhood/MacShare. Enabled by default.
- HTTP. Enabled by default.
You can type readyshare.routerlogin.net/shares to
access the USB drive.
To Next Page
Loading...
Need help?
General
