Security
93
Trek N300 Travel Router and Range Extender PR2000
5. Select ADVANCED > Security > Block Services.
6. Select either the Per Schedule radio button or the Always radio button.
7. If you selected Per Schedule, specify a time period in the Schedule screen.
For more information, see Schedule Blocking on page 94.
8. Click the Add button.
9. From the Service Type list, select the application or service to block.
The list displays several common services, but you are not limited to these choices. To
add any additional services or applications that do not already appear
, select User
Defined.
10. If you know that the application uses either
TCP or UDP, select the appropriate protocol. If
you are not sure, select TCP/UDB (both).
11. Enter the starting and ending port numbers.
If the application uses a single port number, enter that number in both fields.
12. Select the radio button for the IP address configuration you want to block, and enter the IP
addresses.
To Next Page
Loading...
Need help?
General
