EasyManua.ls Logo

NETGEAR ProSafe GS116

NETGEAR ProSafe GS116
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation Guide
16-port Gigabit Switch
10/100/1000 Mbps GS116

Table of Contents

Other manuals for NETGEAR ProSafe GS116

Preview: Specifications
Specifications2 pages

Questions and Answers:

NETGEAR ProSafe GS116 Specifications

General IconGeneral
Form FactorDesktop
Switching Capacity32 Gbps
Forwarding Rate23.8 Mpps
Switch TypeUnmanaged
Humidity10% to 90% non-condensing
Ports16
MAC Address Table Size8K entries
Energy Efficient EthernetYes (IEEE 802.3az)
Dimensions286 x 102 x 27 mm
Operating Temperature0°C to 50°C
Weight0.72 kg (1.59 lb)

Summary

Introduction to the GS116 Gigabit Switch

GS116 16-port 101001000 Mbps Gigabit Switch Overview

Details the NETGEAR GS116 switch for connecting up to sixteen Ethernet-enabled devices at Gigabit speeds.

Installation Overview Steps

Outlines the basic steps for installing the switch, including unpacking, preparation, and connection.

Unpack and Verify Contents

Prepare to Install the Switch

Install and Connect Devices

Troubleshooting Network Issues

Power Light Not Lit

Guidance for when the switch's power light is not illuminated, indicating no power.

Port Light Issues

Troubleshooting steps for when a port light is off or continuously on for a connected device.

Technical Specifications

Regulatory Compliance Information

FCC Compliance Notice

Information regarding compliance with Federal Communications Commission rules for Class A devices.

Canadian Radio Interference Regulations

Details on compliance with Canadian radio-noise emissions regulations for digital apparatus.

Technical Support Resources

Related product manuals