NETGEAR ProSafe Plus GS116E User Manual

ProSafe Plus 16-Port Gigabit Switch GS116E
Step 2. Connect power
Activity (blinking)
No link (off)
Step 3. Check status
On
Off
1000 Mbps link
(both LEDs)
(right LED)
10 Mbps link
Power LED
Port LEDs
Optional
modem
Step 1. Connect equipment
GS116E
Optional router
Computer Server
Internet
(left LED)
100 Mbps link
Installation Guide
GS116E IG_20sept2012.fm Page 1 Thursday, September 20, 2012 9:59 AM

NETGEAR ProSafe Plus GS116E Specifications

General

Model	GS116E
Category	Switch
Switching Capacity	32 Gbps
Form Factor	Desktop
VLAN Support	Yes
QoS	Yes
MAC Address Table Size	8K
Power Supply	External power adapter
Ports	16 x Gigabit Ethernet
Management	Web-based management
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20° to 70°C (-4° to 158°F)
Humidity	90% maximum relative humidity, non-condensing
Certifications	CE, FCC

Summary

Installation Steps

Connect Equipment

Illustrates connecting the GS116E switch to computers, servers, and networks.

Connect Power

Details the process of connecting the power adapter to the GS116E switch.

Check Status Indicators

Explains how to interpret Power LED and Port LEDs for status verification.

Switch Configuration and Support

Install Configuration Utility

Guide on installing the ProSafe Plus Utility software from the resource CD.

Configure Switch Settings

Steps to access and use the utility to configure the GS116E switch.

Product Specifications

Technical details of the GS116E switch, including ports, power, and dimensions.

Technical Support Resources

Information on product registration, web support, and contact details.