EasyManuals Logo

NETGEAR R6080 User Manual

NETGEAR R6080
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
Manage the DHCP Server Address Pool
By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The
router assigns IP, DNS server, and default gateway addresses to all computers that are
connected to its LAN and WiFi network. The assigned default gateway address is the
LAN address of the router.
These addresses must be part of the same IP address subnet as the router’s LAN IP
address. The default DHCP address pool is 192.168.1.2–192.168.1.254.
The router delivers the following parameters to any LAN device that requests DHCP:
An IP address from the range that you define
Subnet mask
Gateway IP address (the router’s LAN IP address)
DNS server IP address (the router’s LAN IP address)
To specify the pool of IP addresses that the router assigns:
1.
Launch a web browser from a computer or mobile device that is connected to the
network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. Make sure that the Use Router as DHCP Server check box is selected.
This check box is selected by default.
6.
Specify the range of IP addresses that the router assigns:
In the Starting IP Address field, enter the lowest number in the range.
This IP address must be in the same subnet as the router. By default, the starting
IP address is 192.168.1.2.
In the Ending IP Address field, enter the number at the end of the range of IP
addresses.
User Manual78Manage the WAN and LAN
Network Settings
AC1000 WiFi Router Model R6080

Table of Contents

Other manuals for NETGEAR R6080

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R6080 and is the answer not in the manual?

NETGEAR R6080 Specifications

General IconGeneral
Ethernet WANYes
SIM card slot-
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)700 Mbit/s
WLAN data transfer rate (first band)300 Mbit/s
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Ethernet LAN (RJ-45) ports4
Product typeTabletop router
Product colorBlack
Antennas quantity2
Power source typeDC
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth136.5 mm
Width185 mm
Height46 mm
Weight250 g

Related product manuals