DescriptionAccess Method
Enabled by default. You can type \\readyshare to access the storage device within
your network. If you change the name in the Network/Device Name field from
readyshare to another name, the link changes accordingly. You can enable
password protection.
Network Connection
Enabled by default. You can type http://readyshare.routerlogin.net/shares to
access the USB device within your network and download or upload files. In this
URL, readyshare is the name that is specified in the Network/Device Name field.
If you change the name in the Network/Device Name field from readyshare to
another name, the link changes accordingly.
You can also click the link that is shown in the Link column. The fixed port is number
is 80. You can enable password protection.
HTTP
Disabled by default. If you enable this feature, remote users can type
https://<public IP address>/shares to access the USB device over the Internet.
<public IP address> is the external or public IP address that is assigned to the
router (for example, 1.1.10.102).
This feature supports file uploading only. The default port is number 443, which
you can change. Password protection is enabled by default.
HTTPS (via internet)
Enabled by default. You can type ftp://readyshare.routerlogin.net/shares to
access the USB device within your network and download or upload files. In this
URL, readyshare is the name that is specified in the Network/Device Name field.
If you change the name in the Network/Device Name field from readyshare to
another name, the link changes accordingly.
You can also click the link that is shown in the Link column. The fixed port is number
is 21. You can enable password protection.
FTP
Disabled by default. If you enable this feature, remote users can type ftp://<public
IP address>/shares to access the USB device over the Internet and download or
upload files. <public IP address> is the external or public IP address that is assigned
to the router (for example, 1.1.10.102).
The default port is number 21, which you can change. Password protection is
enabled by default.
If you set up Dynamic DNS, you can also type a URL domain name. For example,
if your domain name is MyName and you use the NETGEAR DDNS server, you
can type ftp://MyName.mynetgear.com to access the USB device over the
Internet and download or upload files.
FTP (via internet)
8. Click the Apply button.
Your settings are saved.
User Manual111Share USB Storage Devices
Attached to the Router
Nighthawk AC1750 Smart WiFi Router
To Next Page
Loading...
Need help?
General
