13. Enter the code that was sent to your cell phone.
The Circle app verifies the code.
14.
Tap the AWESOME button.
15.
Select a subscription plan and follow the onscreen instructions to set up your
preferences.
Circle with Disney is enabled on your NETGEAR router.
Enable Circle With Disney Using the Circle App
Before enabling Circle, make sure that your router is in router mode. Your router must
be in router mode to work with Circle. You can't enable Circle if your router is in access
point (AP) mode or bridge mode.
If your router is not running the latest firmware, the Circle app checks your router's
firmware and updates the firmware for you.
To enable Circle with Disney using the Circle app:
1. Make sure that your mobile device is connected to your router's network.
2. Download the Circle app on your mobile device.
3. Launch the Circle app.
4. Follow the prompts to set up Circle.
Allow or Block Access to Your Network
You can use access control to block or allow access to your network.
To set up access control:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Security > Access Control.
User Manual44Control Access to the Internet
Nighthawk X6S AC3600 Tri-Band WiFi Router Model R7960P
To Next Page
Loading...
Need help?
General
