NETGEAR R7960P User Manual

Delete a Static Route
To delete a static route:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5.
In the table, select the radio button for the route.
6.
Click the Delete button.
The route is removed from the table.
Ethernet Port Aggregation
Ethernet aggregation lets aggregate two Ethernet ports on your router to improve the
aggregated file transfer speed.
To set up Ethernet port aggregation, connect a device that supports Ethernet port
aggregation and 802.3ad to Ethernet aggregate ports 1 and 2 on your router. Note that
Ethernet port aggregation is also referred to as link aggregation, teaming port, and
port trunking.
Warning: To avoid causing broadcast looping, which can shut down your network, do
not connect an unmanaged switch to Ethernet ports 1 and 2 on your router.
Figure 5. Ethernet port aggregation
Set Up Ethernet Port Aggregation
If you are connecting a switch, make sure that your switch supports 802.3ad LACP.
User Manual89Manage Network Settings
Nighthawk X6S AC3600 Tri-Band WiFi Router Model R7960P

NETGEAR R7960P Specifications

General

Brand	NETGEAR
Model	R7960P
Category	Network Router
Language	English