NETGEAR R7960P User Manual

packets that are sent between the IPTV device and the router’s Internet port from being
processed through the router’s network address translation (NAT) service.
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to
each VLAN tag group.
To add a VLAN tag group and enable the bridge:
1.
Launch a web browser from a computer or mobile device that is connected to the
network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > VLAN/IPTV Setup.
The VLAN/IPTV Setup page displays.
5.
Select the Enable VLAN/IPTV Setup check box.
The page expands.
6.
Select the By VLAN tag group radio button.
The page expands.
7.
Click the Add button.
The Add VLAN Rule page displays.
8.
Specify the settings as described in the following table.
DescriptionField
Enter a name for the VLAN tag group.
The name can be up to 10 characters.
Name
Enter a value from 1 to 4094.VLAN ID
User Manual85Manage Network Settings
Nighthawk X6S AC3600 Tri-Band WiFi Router Model R7960P

NETGEAR R7960P Specifications

General

Brand	NETGEAR
Model	R7960P
Category	Network Router
Language	English