NETGEAR RAX43 User Manual

The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless.
The Wireless Setup page displays.
5. Select or clear the Enable OFDMA in 2.4GHz check box.
Selecting this check box turns on OFDMA in the 2.4 GHz radio band and clearing
this check box turns off OFDMA in the 2.4 GHz radio band.
6. Select or clear the Enable OFDMA in 5GHz check box.
Selecting this check box turns on OFDMA in the 5 GHz radio band and clearing this
check box turns off OFDMA in the 5 GHz radio band.
7. Click the Apply button.
Your settings are saved.
User Manual92Optimize Performance
Nighthawk AX5 5-Stream WiFi Router

NETGEAR RAX43 Specifications

General

USB Ports	1 x USB 3.0
Antenna	4 external antennas
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	WiFi 6 (802.11ax)
Ethernet Ports	5 x 1G Ethernet ports
Security	WPA3
Memory	512MB RAM
Bands	Tri-band (2.4 GHz, 5 GHz, 5 GHz)