NETGEAR RAX70 User Manual

Wall mount your router
You can wall mount your router using the wall-mounting holes on the bottom of your
router.
Note: We recommend using M3 x 20mm screws appropriately mounted to the wall.
Figure 6. Bottom of the router
To wall-mount your router:
1. Drill holes in the wall where you want to wall-mount your router.
2. Insert wall anchors in the holes.
3.
Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed.
4. Align the router’s wall-mounting holes with the screws and mount your router.
User Manual16Hardware Setup
Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router

NETGEAR RAX70 Specifications

General

WiFi Speed	Up to 6.6Gbps
WiFi Bands	Tri-Band
USB Ports	1 x USB 3.0
Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
Processor	Quad-Core 1.5 GHz
Antennas	6
Security	WPA3
Memory	512MB RAM
Ethernet Ports	5 (1 x 2.5 Gbps WAN, 4 x 1 Gbps LAN)