6. Reset button: Use the Reset button to restart (reboot) the router or reset the router
to its factory default settings:
•
Restart the router: Press the Reset button for less than five seconds. The Power
LED lights solid amber and the router restarts.
•
Reset the router to its factory default settings: Press and hold the Reset button
until the Power LED starts blinking amber. The router resets and returns to its
factory settings.
7. Power LED: For more information about the Power LED behavior, see Orbi router
front LED and Power LED behavior on page 9.
Orbi router front LED and Power LED behavior
The Orbi router includes a Router LED on the front and a Power LED on the back.
The following table describes the LED behavior for the Router LED on the front of the
router.
Table 1. Router LED behavior
DescriptionLED color
The router is booting or someone pressed the Sync button.Pulsing white
The router is resetting to its factory default settings.Solid white
The router cannot connect to the Internet.Solid magenta
The router finished booting and is working normally.Off
The following table describes the LED behavior for the router’s Power LED on the back
of the router.
Table 2. Power LED behavior
DescriptionLED color
Power is on.Solid green
The router is booting.Solid amber
The router is resetting to its factory default settings.Blinking amber
The router’s firmware is corrupted.Blinking red
Power is not suppliedOff
User Manual9Overview
Orbi Tri-band Mesh WiFi 6 System
To Next Page
Loading...
Need help?
General
