Getting Started
11
ReadyNAS for Home RAIDiator 4.2
You can use the following buttons to learn more about the ReadyNAS system or systems on
your network:
• Setup. Launches FrontView for the highlighted system.
• Browse. Displays the shares available on the highlighted system. This feature works on
the Windows platform only.
• Rescan. Updates the list of ReadyNAS systems on the network and updates the status of
each system it discovers.
• Locate. Causes the LEDs on the highlighted system to blink. This is useful if you have
multiple ReadyNAS storage systems and you need to determine which RAIDar entry
corresponds to which physical system.
• About. Displays RAIDar information.
• Help. Displays the help screen.
• Exit. Closes RAIDar.
The volume is in life-support mode.
Life-support mode happens when the volume encounters multiple
disk failures and might be dead. However, the ReadyNAS storage
system has blocked it from being marked dead in case someone
accidentally removed the wrong disk while the system was running.
If
the wrong disk was pulled out, shut down the system immediately,
reconnect the disk, and power-on the system.
Note: If you reconnect the disk while the system is
running, the disk will be marked as a newly added disk and
all the data on that disk will be lost during the initialization
process.
A lengthy background task such as a system update is in progress.
Table 1. RAIDar LED icon descriptions (Continued)
LED Icon Description
To Next Page
Loading...
