Shares
37
ReadyNAS for Home RAIDiator 4.2
• If you are enabling the Rsync file-sharing protocol, you can require a user name and
password from anyone trying to access a share using the Rsync file-sharing protocol.
These requirements are established at the share level. For more information, see step 4
in the Fine-Tuning Share Access procedure.
3. Clear check boxes for any file-sharing protocols that you want to disable.
4. Click the Apply button.
Your changes are saved.
Create Shares
By default, new shares have the CIFS protocol enabled with read/write permissions.
To create a share:
1. From the main menu, select Shares > Add Shares.
If you have more than one volume configured on your ReadyNAS system, FrontView
prompts you to select the volume where you want to create the share.
The Add Shares screen displays.
2. Enter a share name and an optional description for each share you want to create.
3. Select or clear the Public Access check box for each share.
Enabling public access means that anyone on your local area network with or without a
user account on the ReadyNAS can access the share.
4. Click the Apply button.
The share or shares are created.
To Next Page
Loading...
