Monitor, Maintain, and Optimize
115
ReadyNAS for Home RAIDiator 4.2
Note: If you have not registered your ReadyNAS system, you are
prompted to register it. For more information, see
Register Your
System on page 9. If you want to update your system now, click the
Register button. To continue with the firmware update process, click
the Later button. The Update screen displays.
2. Click the Check for Update button.
If no firmware update is available, you are notified that your system has the most current
firmware.
If a firmware update is available, you are prompted to update your system.
3. If a firmware update is available, click the Perform System Update button.
WARNING!
Do not click the browser Refresh button during the update
process.
After the download completes, you are prompted to reboot the system.
4. Reboot your system.
If you enabled email alerts, your ReadyNAS system sends a message when the firmware
update is complete.
Update Firmware Locally
If you keep your ReadyNAS system in a place that does not have Internet access, for
example, at a remote vacation cabin, you must update your firmware locally.
To Next Page
Loading...
