System Settings
94
ReadyNAS for Home RAIDiator 4.2
Enable your ReadyNAS System as a WINS Server
If no other WINS servers exist on your network, you can enable your ReadyNAS system as a
WINS server.
To enable your ReadyNAS system as a WINS server:
1. Select Network > WINS from the FrontView main menu.
The WINS screen displays.
2. Scroll down to the Make this device a WINS Server pane.
3. Select the Become a WINS server check box.
4. Click the Apply button.
Your settings are saved.
DHCP
DHCP (Dynamic Host Configuration Protocol) service simplifies management of a network by
dynamically assigning IP addresses to new clients on a network.
WARNING!
Enabling DHCP service on a network that is already using another
DHCP server creates conflicts that can interfere with your ability
to access the Internet.
You can enable your ReadyNAS storage system to work as a DHCP server. This feature is
available only on ReadyNAS storage systems that are installed in networks where DHCP
service is not already available.
If you want to use this device as a DHCP server, you must first specify static addresses in
your network configuration settings. For more information, see Network Settings on page 88.
To Next Page
Loading...
