Backup and Recovery
135
ReadyNAS for Home RAIDiator 4.2
WARNING!
Although this is a recovery procedure, your ReadyNAS system
treats it like a backup job. This means that you use FrontView
screens labeled backup and you reverse the source and
destination systems you used when you backed up the data that
you are recovering.
Backup and recovery jobs ReadyNAS Vault and Time Machine require different procedures.
For more information, ReadyNAS Vault on page 153 or Time Machine on page 154.
To recover backup data to your ReadyNAS system:
1. Select Backup > Add a New Backup from the FrontView Main menu.
The Add a New Backup Job screen displays.
2. From the drop-down list in the STEP 1 - Select backup source pane, select the device
where you backed up your ReadyNAS data.
Depending on how your network is configured, these options vary. Select a USB device
that is attached to your ReadyNAS system, or remote location that stores your backed-up
ReadyNAS data.
If you select a recovery source that requires a path, use a forward slash (/) to separate
directories, for example:
/<share name>/<folder name>
Do not use a backslash (\) in paths.
If you select a remote Rsync server, you must enter the Rsync server’s host name and a
path. Depending on how the Rsync server is configured, you might need to enter a user
name and password. Whether or not you need to enter login credentials depends on how
the Rsync server is configured. For more information, contact the Rsync server’s system
administrator.
To Next Page
Loading...
