Backup and Recovery
144
ReadyNAS for Home RAIDiator 4.2
To recover backup data to your ReadyNAS system:
1. Select Backup > Add a New Backup from the FrontView Main menu.
The Add a New Backup Job screen displays.
2. From the drop-down list in the STEP 1 - Select backup source pane, select the share on
your ReadyNAS system where you backed up your network-attached device’s data.
If you have previously created one or more iSCSI targets on your ReadyNAS system, you
can recover data that you backed up to an iSCSI target. For more information about
creating and managing iSCSI targets, see iSCSI Targets on page 102.
3. From the drop-down list in the STEP 2 - Select a backup destination pane, select the
network-attached device, website, or FTP site where you want to restore data.
Depending on how your network is configured, these options vary.
If you select a recovery destination that requires a path, use a forward slash (/) to
separate directories, for example:
/<share name>/<folder name>
Do not use a backslash (\) in paths.
If you select a remote Rsync server, you must enter the Rsync server’s host name and a
path. Depending on how the Rsync server is configured, you might need to enter a user
name and password. Whether or not you need to enter login credentials depends on how
the Rsync server is configured. For more information, contact the Rsync server’s system
administrator.
To Next Page
Loading...
