Backup and Recovery
146
ReadyNAS for Home RAIDiator 4.2
a. From the Schedule a full backup drop-down list, select Every Time.
b. From the On backup completion, send drop-down list, select what type of logs to
send when the recovery job completes,
You can send a log that lists only errors encountered during recovery, full logs
consisting of file listings (can be large), or status and errors (status refers to
completion status).
Log email messages are restricted to approximately 10,000 lines. For more
information about viewing full logs, see
View a Backup Log on page 150.
c. Ensure that the Remove files from backup destination check box is clear.
Selecting this check box erases the destination path contents before the backup is
performed, which NETGEAR does not recommend for recovery jobs.
WARNING!
If using this option, ensure that you have correctly identified your
backup source and backup destination. If you reverse them, you
might permanently delete your source files. NETGEAR
recommends not enabling this option unless your destination
device is very low on storage space.
Best practice is to experiment with this option using a test share to make sure that you
understand how it works.
d. (Optional) Select the Change ownership of backup files check box.
Your ReadyNAS system attempts to maintain original file ownership whenever
possible. However, you can automatically change the ownership of the backed-up
files to match the ownership of the share. This allows anyone who can access the
backup share to have full access to the backed-up files.
8. Click the Apply button.
Your backup job settings are saved and this recovery job displays in the backup schedule
as a backup job. Because you did not assign a schedule to it, you must manually start the
job.
To Next Page
Loading...
