Disk Configuration
24
ReadyNAS for Home RAIDiator 4.2
2. In the Available Disks pane, select the Add To Volume check box for the disk where you
want to expand the volume.
A pop-up window displays advising you that the disk will be used for volume expansion
after you reboot your system.
3. Click the OK button.
The pop-up window closes.
4. Click the Apply button.
A pop-up window displays advising you to reboot your system.
5. Click the OK button.
The pop-up window closes.
6. Select System > Shutdown.
7. The Shutdown Options screen displays.
8. Select the Shutdown and reboot device radio button and click Apply.
After your system restarts, a pop-up window displays advising you that the volume
expansion process is under way. Ensure that your system is not interrupted during this
process.
9. Click the OK button.
The pop-up window closes.
The RAID Configuration pane advises you of the progress of the volume expansion
process.
The volume expansion process can take several hours. If you set up email notifications
for your system, you receive an email message when the expansion process completes.
To Next Page
Loading...
