Disk Configuration
26
ReadyNAS for Home RAIDiator 4.2
5. Enter DELETE VOLUME in the field and click the OK button.
The volume is deleted.
6. Click the Add Volume tab.
The Add Volume screen displays.
7. In the STEP 1 pane, select the check boxes for the disks you want to include in the new
volume.
8. (Optional) Select the Hot Spare check box for any disk that you want to specify as a hot
spare.
For more information, see Make a Disk a Hot Spare on page 21.
9. In the STEP 2 pane, using the Select RAID level drop-down list, assign a RAID level to this
volume
.
For more information about RAID levels, see Flex-RAID on page 19.
10. In the STEP 3 pane, enter the maximum size for this volume in the Desired volume size
field.
11. Click the Apply button.
You are prompted to reboot your system.
12. Reboot your system.
13. Use RAIDar to reconnect to your ReadyNAS system.
For more information, see RAIDar on page 10.
14. Restore any backed-up data to the reconfigured volume.
For more information, see Recover Data to Your ReadyNAS System on page 134.
To Next Page
Loading...
