Disk Configuration
28
ReadyNAS for Home RAIDiator 4.2
3. Launch RAIDar, highlight your storage system, and click the Setup button.
The ReadyNAS Volume Setup screen displays
.
If you do not select a format within 10 minutes, your system reboots in the same mode
that it was previously using.
4. Select the Expandable Volume (X-RAID2) radio button.
5. (Optional) Select the check box below the Expandable Volume (X-RAID2) radio button.
This option implements dual redundancy. It is available only on 4-bay or 6-bay ReadyNAS
systems. For more information, see Implement Dual Redundancy on page 22.
6. Click the Next button.
You are prompted to confirm the volume creation command.
7. Click the OK button.
The volume is formatted.
This can take quite a while, depending on the size of your hard disk drives.
8. (Optional) Restore any backed-up data to the reformatted disks.
For more information, see Recover Data to Your ReadyNAS System on page 134.
To Next Page
Loading...
