Need help?Do you have a question about the NETGEAR SXK30 and is the answer not in the manual?
General| Brand | NETGEAR |
|---|---|
| Model | SXK30 |
| Category | Network Router |
| Language | English |
Lists the Orbi Pro WiFi 6 Mini Router (SXR30) and Satellite (SXS30) models covered in the manual.
Describes the hardware features of the Orbi Pro WiFi 6 Mini router and satellite.
Explains the meaning of different LED behaviors on the Orbi Pro WiFi 6 Mini router and satellite.
Provides instructions and details for wall-mounting the Orbi Pro WiFi 6 Mini router or satellite.
Shows examples of router and satellite labels, detailing login and network information.
Guides on how to cable and connect the Orbi Pro WiFi 6 Mini router to your network.
Offers advice on placing the Orbi Pro WiFi 6 Mini satellite for optimal signal.
Details the process for syncing the Orbi Pro WiFi 6 Mini satellite with the router.
Explains how to manage and monitor the Orbi network using NETGEAR Insight.
Provides steps for connecting to the Orbi network via wired or WiFi for initial setup.
Explains the different types of logins required for router and internet service.
Guides on accessing the router's web interface for settings management.
Instructions on how to change the language of the router's web interface.
Helps users resolve browser security warnings when accessing the router interface.
Guides on using the setup wizard to automatically configure internet settings.
Instructions for manually configuring the router's internet connection settings.
Details on setting up an internet connection that does not require a login.
Steps to configure an internet connection that requires a login and password.
Guides on specifying manual settings for various IPv6 internet connection types.
Explains how to automatically detect and configure IPv6 internet connection.
Details on using auto configuration for setting up an IPv6 internet connection.
Instructions for setting up an IPv6 internet connection using a 6to4 tunnel.
Guides on establishing an IPv6 WAN connection through a 6rd tunnel.
Steps for configuring an IPv6 internet connection in pass-through mode.
Instructions for setting up a fixed IPv6 internet connection with manual IP settings.
Guides on setting up an IPv6 internet connection using a DHCP server.
Details on configuring an IPv6 internet connection using PPPoE protocol.
Explains how to change the Maximum Transmission Unit (MTU) size for network performance.
Allows or denies network access based on device MAC addresses for specific networks.
Guides on enabling and configuring a MAC access control list for a network.
Steps to automatically add detected devices to a MAC access control list.
Instructions for manually managing devices within a MAC access control list.
Explains how to disable a MAC access control list for a specific network.
Allows blocking or allowing access to the entire Orbi network based on MAC addresses.
Guides on enabling network access control and defining access rules for devices.
Details on managing devices that are allowed access to the Orbi network.
Instructions for managing devices that are blocked from accessing the Orbi network.
Guides on using keywords to block specific internet sites on the network.
Instructions for removing keywords from the internet site blocking list.
Explains how to exempt a specific trusted computer from blocking rules.
Guides on blocking specific internet services at the router level.
Details on scheduling internet site and service blocking based on time.
Instructions for configuring email notifications for security events and logs.
Guides on changing the admin WiFi network name, channel, or VLAN settings.
Instructions for changing the admin WiFi password and security options (WPA2/WPA3).
Guides on enabling and managing settings for the employee WiFi network (Wireless 2).
Details on changing the employee WiFi network password and security settings.
Guides on enabling and managing settings for the IoT WiFi network (Wireless 3).
Instructions for changing the IoT WiFi network password and security settings.
Guides on setting up a guest WiFi network with an optional captive portal.
Details on configuring a guest network with open access or password authentication.
Instructions for setting up Facebook Wi-Fi for guest access with check-in options.
Guides on setting up a guest network that redirects users to a splash page.
Explains how to manage download bandwidth allocation for each WiFi network (SSID).
Covers advanced WiFi settings like region, SSID broadcast, and coexistence.
Instructions on changing the router's operating region for WiFi settings.
Guides on enabling or disabling WiFi network name (SSID) broadcasting.
Details on enabling/disabling 20/40 MHz coexistence to manage WiFi interference.
Explains how to enable or disable Wi-Fi Multimedia (WMM) for traffic prioritization.
Guides on modifying CTS/RTS threshold and preamble mode for WiFi radios.
Instructions on adjusting the WiFi transmission output power for radios.
Details on generating a new WiFi backhaul password for router-satellite communication.
Guides on enabling or disabling MU-MIMO for improved WiFi performance with multiple clients.
Explains how to enable or disable fast roaming for seamless WiFi client roaming.
Guides on enabling or disabling Protected Management Frames (PMF) for WiFi security.
Allows viewing and configuring WAN settings like DoS protection and DMZ server.
Guides on setting up and managing Dynamic DNS for remote network access.
Instructions for registering and setting up a new NETGEAR Dynamic DNS account.
Guides on configuring the router to use an existing Dynamic DNS account.
Details on modifying existing Dynamic DNS account settings.
Instructions for setting up a default DMZ server to improve application compatibility.
Allows managing LAN settings and VLAN profiles for each LAN port.
Guides on modifying default LAN 1 IP address and subnet mask settings.
Instructions for changing settings for the employee LAN 2, including IP address.
Details on changing settings for the IoT LAN 3, including IP address.
Guides on changing settings for the guest LAN 4, including IP address.
Instructions for setting custom VLAN profiles and IP settings for LAN 5.
Guides on configuring the router to act as a DHCP server for LANs.
Details on setting up a DHCP server for the default LAN 1 with IP address range.
Instructions for setting up a DHCP server for the employee LAN 2.
Guides on setting up a DHCP server for the IoT LAN 3.
Details on setting up a DHCP server for the guest LAN 4.
Instructions for setting up a DHCP server for the custom LAN 5.
Guides on disabling the router's DHCP server feature.
Allows reserving IP addresses for computers or servers requiring permanent IP settings.
Steps for reserving a specific IP address for a device via DHCP.
Instructions for editing an existing reserved IP address entry.
Guides on removing a reserved IP address entry.
Allows managing custom static routes, typically for multi-router or multi-subnet networks.
Instructions for setting up a static route for network traffic routing.
Guides on editing an existing static route configuration.
Details on removing a static route entry from the configuration.
Explains how Universal Plug and Play (UPnP) helps devices connect and discover network services.
Guides on managing Virtual LANs (VLANs) and configuring Ethernet port modes (Trunk/Access).
Instructions for changing Ethernet port modes between Trunk and Access.
Details on creating new VLAN profiles with names, IDs, and feature settings.
Guides on adding VLAN profiles directly to LAN ports.
Instructions for changing the VLAN profile assignment for Ethernet ports.
Guides on changing VLAN profile assignments for specific LAN ports.
Details on enabling, changing, or disabling VLAN profiles for WiFi networks.
Instructions for removing a VLAN profile from the configuration.
Guides on setting up link aggregation groups (LAG) for increased throughput or redundancy.
Steps for adding a link aggregation group between router, satellite, or switch.
Instructions for removing a link aggregation group.
Guides on updating router and satellite firmware, including automatic updates.
Explains how to enable automatic firmware updates for the Orbi system.
Instructions on checking for and performing firmware updates manually.
Details on manually updating firmware for Orbi router and satellite devices.
Step-by-step guide for manually updating the Orbi satellite's firmware.
Instructions for manually updating the Orbi router's firmware.
Guides on changing the router's admin login password for security.
Explains how to enable the password reset feature for the admin account.
Instructions on how to reset the router's admin password if forgotten.
Guides on viewing the router's current status and network usage information.
Details on displaying statistics for the router's WAN and LAN Ethernet ports.
Instructions on checking the status of the router's internet connection.
Guides on using Speedtest to check the internet bandwidth.
Explains how to view all connected devices on the Orbi network.
Guides on viewing satellite status information via its web interface.
Instructions on viewing and managing router activity logs.
Guides on configuring the router to send system logs to a syslog server.
Details on monitoring internet traffic volume and setting limits.
Instructions on changing the Network Time Protocol (NTP) server settings.
Guides on manually setting the router's time zone.
Explains how to back up, restore, or reset router configuration settings.
Steps for backing up the router's current configuration settings.
Guides on managing automatic configuration backup options.
Instructions for erasing current settings and restoring factory defaults.
Details on restoring router configuration settings from a backup file.
Guides on setting up remote access to manage router settings over the internet.
Instructions on how to use remote access to manage the router.
Guides on configuring the Orbi Pro router to function as a WiFi access point.
Instructions for changing the router back from AP mode to router mode.
Guides on allowing specific incoming traffic to reach a server on the local network.
Steps for forwarding specific incoming protocols to local servers.
Instructions for adding custom port forwarding services for applications.
Guides on editing existing port forwarding entries.
Details on removing a port forwarding entry from the configuration.
Explains port triggering for dynamic port opening for applications.
Instructions for adding a port triggering service.
Guides on enabling the port triggering feature in the router.
Guides on establishing a virtual private network (VPN) connection to the router.
Instructions for specifying VPN service settings within the router.
Details on installing OpenVPN software on various devices for VPN connections.
Step-by-step guide for installing OpenVPN client software on Windows.
Instructions for installing OpenVPN client software on Mac computers.
Guides on installing OpenVPN client software on iOS devices.
Details on installing OpenVPN client software on Android devices.
Instructions on opening a VPN tunnel from a Windows computer to the router.
Guides on using VPN to access your business internet service remotely.
Details on configuring the router to allow VPN clients internet access.
Instructions on blocking VPN client internet access through the router.
Guides on accessing business internet service via a VPN tunnel.
Provides troubleshooting tips for common network problems.
Step-by-step guide for correctly restarting the network modem and router.
Tips for ensuring WiFi settings match between devices and the router.
Checks for correct computer network settings, especially IP addresses and DHCP.
Troubleshooting steps for issues with router and satellite synchronization.
Guides on troubleshooting login issues with the router's web interface.
Troubleshooting steps when unable to access the internet despite network connectivity.
Helps resolve issues with loading web pages, DNS, or traffic meter limits.
Guides on troubleshooting internet connection problems related to PPPoE.
Steps for isolating and resolving issues with connecting to the Orbi WiFi network.
Explains how to use the ping utility for network troubleshooting.
Guides on testing the LAN path connectivity to the router using ping.
Instructions on testing the network path from your computer to a remote device.
Describes the factory default settings for the Orbi Pro WiFi 6 Mini router and satellite.
Lists the technical specifications for the Orbi Pro WiFi 6 Mini router model SXR30.
Lists the technical specifications for the Orbi Pro WiFi 6 Mini satellite model SXS30.
To Next Page