Need help?Do you have a question about the NETGEAR SXK50 and is the answer not in the manual?
General| Antenna type | Internal |
|---|---|
| Product type | Mesh system |
| Reset button | Yes |
| Product color | White |
| Maximum coverage | 464 m² |
| Number of products included | 2 pc(s) |
| Wi-Fi band | Tri-band (2.4 GHz / 5 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
| Top Wi-Fi standard | Wi-Fi 6 (802.11ax) |
| Security algorithms | WPA, WPA2-PSK, WPA3-PSK |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| WLAN data transfer rate (first band) | 573 Mbit/s |
| WLAN data transfer rate (second band) | 2402 Mbit/s |
| Ethernet LAN (RJ-45) ports | 4 |
| AC adapter output current | 2.5 A |
| AC adapter output voltage | 12 V |
| Harmonized System (HS) code | 85171800 |
Weight and Dimensions| Depth | 75.6 mm |
|---|---|
| Width | 170 mm |
| Height | 224.5 mm |
| Weight | 720 g |
Guides on how to connect the Orbi Pro WiFi 6 AX5400 router using Ethernet cables.
Provides recommendations on satellite placement for optimal WiFi signal and syncing.
Details the process of syncing satellites with the Orbi Pro WiFi 6 AX5400 router.
Guides users through automatically detecting and setting up Internet connection parameters.
Provides instructions for manually configuring Internet connection settings based on ISP type.
Covers various IPv6 connection types and setup requirements.
Allows or denies device access based on MAC addresses for specific networks.
Blocks or allows access to the entire Orbi Pro network based on MAC addresses.
Covers settings for the primary admin WiFi network (Wireless 1).
Details configuration for the dedicated Employee WiFi network (Wireless 2).
Explains setup for the IoT WiFi network (Wireless 3) for smart devices.
Guides on setting up a guest network with optional captive portal features.
Covers changing IP addresses and subnet masks for the router's LAN interfaces.
Details how to configure DHCP servers for each LAN to assign IP addresses automatically.
Covers checking for and updating router and satellite firmware.
Explains how to change and manage the router's administrative password.
Guides on viewing router status, satellite status, and connected devices.
Explains how to remotely access and manage router settings over the Internet.
Allows directing specific incoming Internet traffic to designated local servers or devices.
Dynamically opens incoming ports based on specific outbound traffic triggers.
Guides on enabling the OpenVPN service on the router to set up VPN tunnels.
Explains how to install OpenVPN client software and configuration files on various devices.
Offers solutions for issues where the router and satellite fail to sync or connect.
Provides steps to troubleshoot login issues with the router's web interface.
Offers guidance on diagnosing and resolving problems with Internet connectivity.
To Next Page