The VLAN / Bridge Settings page displays.
5. Select the radio button next to the custom VLAN you want to delete.
6. Click the DELETE button.
The VLAN profile is removed from the table.
7. Click the Apply button.
Your settings are saved.
VLAN membership for a LAN, WiFi network,
or port
By default, each LAN and each WiFi network is a member of a preset VLAN (see How
the router organizes LANs, VLANs, and WLANs on page 74). By default, each port is a
member of VLAN 1, the Default VLAN.
You can change the VLAN membership for a LAN, WiFi network, or port.
CAUTION: Be sure that you fully understand the consequences of changing a VLAN
membership. Incorrect configuration might cause network problems, such as traffic
being discarded.
Change the VLAN profile for a LAN
You can change the VLAN profile for a LAN. Note the following:
•
The VLAN profile for LAN 1 is set and you cannot change it.
•
If a LAN is assigned to a VLAN profile, you cannot assign another LAN to the same
VLAN profile.
This also means that you cannot change the preset VLAN profile for LAN 2, LAN 3,
and LAN 4 until you add a new VLAN profile (that is, a custom VLAN profile) and
assign LAN 2, LAN 3, or LAN 4 to it. Doing so releases the preset VLAN profile so
that you can assign a different LAN to it.
•
If an Ethernet port and a LAN are assigned to same VLAN profile, you cannot change
the VLAN profile for the LAN until you assign the Ethernet port to a different VLAN
profile.
User Manual81Manage the VLANs
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
To Next Page
Loading...
