14
15. Connect your Trek to a power source and rotate the antenna.
For more information, see Set Up Your Trek on page 6
16. If your computer or WiFi device disconnects from the Trek, reconnect
your computer or WiFi device to the Trek.
Use the Trek in Router Mode
You can connect the Trek to a DSL or cable modem and use the Trek as a
router.
NETGEAR
Power
Internet
WiFi
USB
Wired
Power Off
Wireles
¾ To use the Trek in router mode:
1. Connect you Trek to a power source and rotate the antenna.
For more information, see Set Up Your Trek on page 6
2. Connect your DSL or cable modem to the Internet/LAN port on the
Trek with an Ethernet cable.
Internet
DSL or
cable
Modem
Trek
Ethernet cable
To Next Page
Loading...
