NETGEAR Trek PR2000 Quick Start Guide

15
3. Set the Internet Mode switch to Wired.
4. Connect your computer or WiFi device to the Trek.
You can use an Ethernet cable or connect with WiFi:
• For a wired connection, use an Ethernet cable (not included) to
connect your computer to the LAN port on the Trek.
• To connect with WiFi, use the Trek’s network name (SSID) and
WiFi password, which are on the sticker near the Internet Mode
switch. For more information, see Connect Devices to Your Trek
with WiFi on page 16.
5. Launch a web browser.
6. Enter www.routerlogin.net in the address field of the browser.
NETGEAR genie displays.
7. If a login screen displays, do the following:
a. Enter admin for your user name and password for your
password.
The BASIC Home screen displays.
b. Select ADVANCED > Setup Wizard.
The Setup Wizard screen displays.
8. Follow the onscreen instructions.
NETGEAR genie guides you through connecting the Trek to the
Internet.

NETGEAR Trek PR2000 Specifications

General

Brand	NETGEAR
Model	Trek PR2000
Category	Network Router
Language	English