13
4. Connect your computer or wireless device to the Trek's SSID, or
connect your computer or wireless device to the Trek’s LAN port
with an Ethernet cable.
5. Open a web browser on your computer or wireless device, type
www.routerlogin.net in the address field, and press the Enter key.
If a login screen displays, enter admin for your user name and
password for your password. Then click the OK button.
The Setup Wizard screen displays.
6. Click
the Next button and follow the prompts of the Setup Wizard.
When you are done, the Congratulations screen displays.
The Trek is connected to the Internet.
7. (Optional) Connect your other wireless devices to the Trek.
For more information, see Connect WiFi Devices to Your Trek on
page 16.
8. (Optional) Connect a USB device to the USB port of the Trek.
A USB device can be a USB storage drive or a USB printer.
When plugged into the wall, the USB port can also be used as a
cell phone charger. See the user manual.
To Next Page
Loading...
Need help?
General
