NETGEAR Trek PR2000 Instalaltion Guide

6
Indicator LEDs
Monitor the status of your Trek using the following LEDs:
NETGEAR
Power
Internet
WiFi
USB
Wired
Power Off
Wireles
Cover
(rotate
Indicator LEDs
clockwise
to open)
• Green. The Trek is powered on.
• Off. The Trek is powered off.
• Green
. Either the Internet/LAN port is
connected
physically or a wireless
channel is associated successfully.
• Blinking
green.
One of the following
occurred:
• Off. The Trek is not connected in either
wired
or wireless mode.
• Green. Either the LAN port or a wireless
device
is connected to the Trek.
• Off.
No device is connected.
• Green
. The USB drive is properly
mounted.
• Off.
No USB drive is detected.
Power
Internet
- The Reset
button was pressed longer
than five seconds.
- A firmware upgrade is in progress.
- The bandwidth limit was exceeded.
WiFi
USB

NETGEAR Trek PR2000 Specifications

General

Brand	NETGEAR
Model	Trek PR2000
Category	Network Router
Language	English