NETGEAR Tri-band Mesh WiFi 6 Router User Manual

Router LED behavior
The following table describes the LED behavior for the LED that is on the front of the
router.
Table 1. Router LED behavior
DescriptionLED color
The router LED blinks white for one of the following reasons:
•
You connected the power adapter to the router. Now the router is booting and
attempting to sync with the satellite.
•
You pressed the Sync button and the router is attempting to sync with the satellite.
•
You pressed the Reset button and the router is resetting to its factory default settings.
Blinking white
The router finished booting, is connected to the Internet, and is working normally. The
LED stays lit solid blue when the satellite is working normally.
Solid blue
The router is unable to connect to the Internet.Solid amber
The router's firmware is corrupted.Blinking amber
User Manual10Overview
Nighthawk Tri-band Mesh WiFi 6

NETGEAR Tri-band Mesh WiFi 6 Router Specifications

General

Brand	NETGEAR
Model	Tri-band Mesh WiFi 6 Router
Category	Network Router
Language	English