NETGEAR UTM9S User Manual

8
4. Click Apply to save your settings. The wireless network module
(not the UTM9S or UTM25S) reboots.
Note: Other wireless settings that you can configure on the Radio
Settings screen are explained in “Configure the Basic Radio Settings”
in Appendix B, “Wireless Network Module for the UTM9S and
UTM25S,” of the reference manual.
Configure WPA+WPA2 with PSK Security
NETGEAR recommends that you configure wireless authentication
and encryption to secure your wireless traffic. WPA+WPA2 with a
pre-shared key (PSK) is easy to configure and works well in most
situations. However, if your network uses 802.11n devices only, select
WPA2 to enable the 802.11n devices to function at full speed.
 To configure WPA+WPA2 with PSK security for the UTM9S or
UTM25S default wireless profile:
1. Select Network Config > Wireless Settings > Wireless
Profiles. The Wireless Profiles screen displays:

NETGEAR UTM9S Specifications

General

Brand	NETGEAR
Model	UTM9S
Category	Network Hardware
Language	English