NETGEAR WAC124

12
Router Mode: Set up VPN
Connections with OpenVPN
If the access point/router is in router mode, you can use OpenVPN software to set up
VPN connections and remotely access an office or site at which an access point/router
is installed. This chapter describes how to set up OpenVPN on the access point/router
and on a computer or mobile device and how to initiate a VPN connection using
OpenVPN.
The chapter includes the following sections:
• Router mode: Enable and configure OpenVPN and VPN client access on the access
point/router
• Router mode: Install OpenVPN client software on a remote client
• Router mode: Set up an OpenVPN connection
Note: The information in this chapter does not apply if the access point/router is in
access point mode.
199