NETGEAR WAC124

Router mode: Reserve a LAN IP Address.................................118
Router mode: Change a reserved LAN IP address.................119
Router mode: Remove a reserved LAN IP address entry.......120
Add and manage IPv4 static routes...............................................121
Add an IPv4 static route..............................................................122
Change an IPv4 static route........................................................123
Remove an IPv4 static route.......................................................124
Router mode: Enable an IPTV bridge for a port group or VLAN tag
group.................................................................................................125
Router mode: Enable an IPTV bridge for a port group..........125
Router mode: Enable an IPTV bridge for a VLAN tag group..126
Router mode: Change the MTU size..............................................128
Chapter 8 Maintain and Monitor the Access Point/Router
Update the firmware of the access point/router..........................132
Let the access point/router check for new firmware and update
the firmware..................................................................................132
Check for new firmware manually and update the access
point/router manually.................................................................133
Manage the configuration file of the access point/router...........135
Back up the access point/router configuration file.................135
Restore the access point/router configuration settings..........136
Recover the local login admin password......................................137
Return the access point/router to its factory default settings.....138
Use the Reset button...................................................................138
Erase the settings to factory default settings...........................139
Manage the time settings................................................................140
Manually set the time zone and adjust the daylight saving
time................................................................................................140
Change the NTP server...............................................................141
Manage the activity log...................................................................142
Specify which activities the access point/router logs..............142
View, send, or clear the logs......................................................143
View the status and statistics of the access point/router.............144
Access point mode: View information about the access
point/router, LAN port, and WiFi settings................................144
Router mode: View information about the access point/router,
Internet port, and WiFi settings.................................................147
Check the Internet connection status........................................150
Display Internet port statistics....................................................152
View devices currently on the access point/router network...153
Router mode: Monitor and meter Internet traffic.........................155
Router mode: Start the traffic meter without traffic restrictions.155
Router mode: Restrict Internet traffic by volume.....................156
6
AC2000 802.11ac Wireless Access Point/Router WAC124