Advanced Configuration
100
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Select Configuration > System > Advanced > Bonjour.
5. Select the Disable radio button.
6. Click the Apply button.
Your settings are saved.
Configure Advanced WiFi Settings
You can enable various WLAN features and configure WLAN settings for the 802.11b/bg/ng
and 802.11a/na modes.
The default WLAN settings normally work well. However, you can use the advanced settings
to fine-tune the overall performance of the access point for your specific environment.
To configure advanced WiFi settings:
1. Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
For more information, see Log In to the Access Point on page 15.
2. In the address bar, enter the IP address of the access point.
A login window opens.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Select Configuration > Wireless > Advanced > Wireless Settings.
To Next Page
Loading...
