Need help?Do you have a question about the NETGEAR WAX630E and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Modulation | OFDM |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Spread spectrum method | OFDM, OFDMA |
| Ethernet LAN data rates | 10, 100, 1000, 2500 Mbit/s |
| Maximum data transfer rate | 7800 Mbit/s |
| Maximum data transfer rate (5 GHz) | 4800 Mbit/s |
| Maximum data transfer rate (2.4 GHz) | 600 Mbit/s |
| Security algorithms | EAP-TLS, PEAP, SSL/TLS, TTLS, WPA, WPA2, WPA3 |
| Service Set Identifier (SSID) features | SSID broadcast, SSID broadcast on/off |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Output current | 3.5 A |
| Output voltage | 12 V |
| Placement | Ceiling, Wall |
| Product color | White |
| Antenna type | Internal |
| Antenna gain level (max) | 4.4 dBi |
| Operating temperature (T-T) | 0 - 40 °C |
| Number of products included | 1 pc(s) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 268.3 mm |
|---|---|
| Width | 266.6 mm |
| Height | 55.5 mm |
| Weight | 1050 g |
Describes the local browser user interface (UI) and NETGEAR Insight remote management features.
Lists available additional documents for the access point, such as installation guides.
Explains the benefits and features of WiFi 6E technology, including high-bandwidth channels.
Details the physical ports and connectors on the access point's bottom panel.
Provides essential safety guidelines to ensure personal safety and protect equipment from damage.
Offers tips for optimal placement of the access point to maximize WiFi signal range.
Guides through connecting the access point to a network using a PoE++ switch or power adapter.
Outlines methods to connect to the access point for initial setup via Insight Cloud Portal or local UI.
Defines the roles of root and extender access points in a mesh WiFi network.
Details steps for configuring an access point as an extender via the Insight Cloud Portal.
Guides on installing the Insight app to manage mesh WiFi networks and access points.
Explains how to create and configure WiFi networks (SSIDs) with various security options.
Covers modifying WiFi network security settings like WPA3 Personal and WPA2 Personal.
Details how to configure basic wireless settings like channel width and output power for radios.
Guides on adjusting channel width settings for radios to improve performance and reduce interference.
Explains how to configure a basic captive portal with splash pages stored on the access point.
Details the process to register the access point with Facebook Wi-Fi for customer access.
Describes how to create a blacklist to block specific URLs and keywords for internet access.
Covers adding, changing, and deleting user accounts for local browser UI access.
Explains how to set up access control lists (ACLs) based on MAC addresses to manage device access.
Guides on disabling DHCP client and configuring a static IP address for the access point.
Details how to configure VLAN settings for network traffic separation and management.
Explains how to switch between Insight remote management and local browser management modes.
Provides steps to change the password for the local browser UI admin user account.
Covers checking for and updating the access point's firmware via WiFi or LAN connection.
Guides on resetting the access point to its original factory default configuration.
Shows how to view the access point's connection status, IP settings, and system information.
Details how to view the operational status and settings for the 2.4 GHz, 5 GHz, and 6 GHz radios.
Provides information on client types, distribution across radios, and recent client activity.
Explains how to configure the access point's addressing and traffic mode (NAT or Bridge).
Details how to enable client isolation to prevent WiFi clients from communicating with each other.
Lists the necessary requirements for setting up WiFi base stations, repeaters, and bridges.
Guides on configuring WiFi bridge settings between two access points for wireless connectivity.
Explains how to configure advanced WiFi settings for individual radios (2.4 GHz, 5 GHz, 6 GHz).
Details how to configure load balancing settings to maintain WiFi network speed and performance.
Provides guidance on diagnosing issues by interpreting the status of the access point's LEDs.
Offers troubleshooting steps when an extender access point fails to connect to a root access point.
Helps diagnose and resolve issues when a WiFi client device cannot connect to the access point.
Lists the default settings for management, WiFi, and general system configurations.
Provides detailed technical specifications for the access point, including hardware and compliance.
Identifies the included mounting parts for installing the access point on walls or ceilings.
Provides step-by-step instructions for securely mounting the access point onto a wall.
Details the procedure for mounting the access point onto a ceiling T-bar.
To Next Page
