Management and Monitoring
92
ProSAFE Dual-Band Wireless AC Access Points WAC720 and WAC730
5. Click the Refresh button.
The devices connected to the ensemble display, listed by MAC address.
Monitor the Access Points and Networks Neighboring the Ensemble
You can display the access points (and their associated WiFi networks) that are the
neighbors of the ensemble.
To monitor the networks neighboring the ensemble:
1. Open a web browser from a computer that is connected to the same network as the
access point or to the access point directly through an Ethernet cable.
For more information, see Log In to the Access Point on page 15.
2. In the address bar, enter the IP address of the access point.
A login window opens.
3. Enter the user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
4. Select Monitor > Ensemble > Wireless Neighborhood.
The Wireless Neighborhood page displays.
5. From the Neighbor APs menu, select one of the following options:
• Not in Ensemble. The access points that are not in the ensemble are displayed.
• In Ensemble. The access points that are in the ensemble are displayed.
To Next Page
Loading...
